产品展示

产品中心

当前位置: 首页 > 产品中心 > 内圆磨床
M2110C 内圆磨床

M2110C 内圆磨床

  • 所属分类:内圆磨床
  • 浏览次数:
  • 二维码:
  • 发布时间:2022-04-13 09:08:38
  • 产品概述

M2110C 内圆磨床介绍:

M2110C 内圆磨床的进给及补偿,由两个互不干涉的传动机构执行,进给可采用手动或液动二种进给方式。

机床设有跳进、跳出机构,因此退出砂轮进行测量或修整后不必重新手动对刀。

工作台快退设有中停装置,快退距离可按需调整,以减少辅助时间。

工作台启动手把设有安全联锁装置,确保装卸和测量工件时的安全性。

机床砂轮轴转速为21000转/分,可提高磨削小孔时的质量。

用户特殊订货,机械磨头可改装电主轴变频调速,以适应磨削小直径内孔。

主要特点:

机床床身采用铸铁浇注,结构紧凑,稳定性好,刚性强。

机床参数的设置,调整采用触摸屏形式,可实现人机对话,操作直观方便。

机床进给采用日本三菱伺服电机通过联轴器驱动滚珠丝杆运动,导轨采用十字交叉式滚柱钢导轨,度高,刚性好。

工作台往复运动的液压部分由PLC动控制。

机床工件的夹紧由三爪卡盘、气动夹具、液压夹具、薄膜夹具等多种夹具可供用户选配。

磨削用砂轮轴采用高速电主轴,由静止变频器控制,实现无极调速。


The feed and compensation of the M2110C internal grinding machine are carried out by two non-interfering transmission mechanisms, and the feed can be either manual or hydraulic.


The machine tool has a jump and jump mechanism, so it is not necessary to manually reset the tool after exiting the grinding wheel for measurement or dressing.


The table quick retreat is equipped with a middle stop device, and the fast retreat distance can be adjusted as needed to reduce the auxiliary time.


The starting handle of the workbench is equipped with a safety interlock device to ensure the safety of loading, unloading and measuring the workpiece.


The grinding wheel shaft speed is 21000 RPM, which can improve the quality of grinding small holes.


Customer special order, mechanical grinding head can be modified electric spindle frequency conversion speed regulation, to adapt to grinding small diameter holes.


Main features:


Machine bed using cast iron casting, compact structure, good stability, strong rigidity.


The setting and adjustment of the parameters of the machine tool adopt the touch screen form, which can realize the man-machine dialogue and the operation is intuitive and convenient.


The machine feed adopts Japanese Mitsubishi servo motor to drive the ball screw movement through the coupling, and the guide rail adopts cross-type roller steel guide rail with high degree and good rigidity.


The hydraulic part of the reciprocating movement of the table is controlled by PLC.


The clamping of the workpiece of the machine tool is made up of three jaw chuck, pneumatic clamp, hydraulic clamp, film clamp and so on.


Grinding wheel shaft adopts high-speed electric spindle and is controlled by static frequency converter to realize stepless speed regulation.



主要技术参数:

机床型号
M2110C
 磨孔直径(mm)
ф6-ф100
 磨孔长度(mm)φ6
9
φ100
150
 工件旋径(mm)罩内
ф260
罩外
ф480
 工作台行程(mm)
550
 床头箱回转角度(°)
20°
 工件转速(r/min)
180-500.4级(steps)
 砂轮转速(r/min)
10000.18000.21000
工作台运动速度(工作 修整)(grind dressing)(mm)
1.5-6
进给分辨率(mm)
0.002
机床总功率(kw)
约4
机床外形尺寸(mm)
2363*1260*1310
机床重量(kg)
1800
 端磨 端磨外径(mm)
 砂轮转速(r/min)
 端面平面度(平或凹)(mm)
 端面粗糙度(μm)
 工作精度 圆度(mm)
0.0025
 圆柱度(mm)
0.004
 粗糙度(μm)
Ra0.63

本页面主要介绍M2110C 内圆磨床的特点及技术参数,若想了解更多关于内圆磨床的其他型号,请继续浏览本网站。

上一篇:M215A、MD215A内圆磨床2022-08-27
下一篇:M2120A、MD2120A内圆磨床2022-04-10

近期浏览:

Copyright © 版权所有 无锡恒屹精密机床有限公司 苏ICP备17057727号-2 技术支持: 无锡网站建设
主要从事于数控内圆磨床,数控外圆磨床,数控复合磨床, 欢迎来电咨询!

技术支持:

祥云平台